International Journal of Industrial Engineering Computations
Publisher: Growing Science
Application of desirability function for optimizing the performance characteristics of carbonitrided bushes
Author(s): Boby John
Volume: 4
Issue: 3
Year: 2013
Author(s): Boby John
Volume: 4
Issue: 3
Year: 2013
A fuzzy goal programming approach to solve multi-objective supply chain network design problems
Author(s): Amir Abbas | Kanani Nezhad | Emad Roghanian | Zahra Azadi
Volume: 4
Issue: 3
Year: 2013
Author(s): Amir Abbas | Kanani Nezhad | Emad Roghanian | Zahra Azadi
Volume: 4
Issue: 3
Year: 2013
Optimization of multiple performance characteristics in turning using Taguchi’s quality loss function: An experimental investigation
Author(s): Ashok Kumar Sahoo | Ashok Kumar Sahoo | Tanmaya Mohanty | Tanmaya Mohanty
Volume: 4
Issue: 3
Year: 2013
Author(s): Ashok Kumar Sahoo | Ashok Kumar Sahoo | Tanmaya Mohanty | Tanmaya Mohanty
Volume: 4
Issue: 3
Year: 2013
A useful empirical Bayesian method to analyse industrial data from saturated factorial designs
Author(s): Marta Yukie Baba | Jorge Alberto Achcar | Fernando Antonio Moala | Sergio Minoru Oikawa | Claudio Luis Piratelli
Volume: 4
Issue: 3
Year: 2013
Author(s): Marta Yukie Baba | Jorge Alberto Achcar | Fernando Antonio Moala | Sergio Minoru Oikawa | Claudio Luis Piratelli
Volume: 4
Issue: 3
Year: 2013
Optimizing a multi-objectives flow shop scheduling problem by a novel genetic algorithm
Author(s): N. Shahsavari Pour | R. Tavakkoli-Moghaddam | H. Asadi
Volume: 4
Issue: 3
Year: 2013
Author(s): N. Shahsavari Pour | R. Tavakkoli-Moghaddam | H. Asadi
Volume: 4
Issue: 3
Year: 2013
A solution to robot selection problems using data envelopment analysis
Author(s): Suprakash Mondal | Shankar Chakraborty
Volume: 4
Issue: 3
Year: 2013
Author(s): Suprakash Mondal | Shankar Chakraborty
Volume: 4
Issue: 3
Year: 2013
Project selection problem under uncertainty: An application of utility theory and chance constrained programming to a real case
Author(s): Behnam Beheshti Pour | Siamak Noori | Reza Hosnavi Atashgah
Volume: 4
Issue: 3
Year: 2013
Author(s): Behnam Beheshti Pour | Siamak Noori | Reza Hosnavi Atashgah
Volume: 4
Issue: 3
Year: 2013
Measuring the performance of FCM versus PSO for fuzzy clustering problems
Author(s): Hamid Reza Jafari | Amir Reza Soltani | Mohammad Reza Soltani
Volume: 4
Issue: 3
Year: 2013
Author(s): Hamid Reza Jafari | Amir Reza Soltani | Mohammad Reza Soltani
Volume: 4
Issue: 3
Year: 2013
Some heuristics for the hybrid flow shop scheduling problem with setup and assembly operations
Author(s): Parviz Fattahi | Seyed Mohammad Hassan Hosseini | Fariborz Jolai
Volume: 4
Issue: 3
Year: 2013
Author(s): Parviz Fattahi | Seyed Mohammad Hassan Hosseini | Fariborz Jolai
Volume: 4
Issue: 3
Year: 2013
Modeling quality control data using mixture of parametrical distributions
Author(s): Jorge Alberto Achcar | Claudio Luis Piratelli | Roberto Molina de Souza
Volume: 4
Issue: 3
Year: 2013
Author(s): Jorge Alberto Achcar | Claudio Luis Piratelli | Roberto Molina de Souza
Volume: 4
Issue: 3
Year: 2013
Some studies on cutting force and temperature in machining Ti-6Al-4V alloy using regression analysis and ANOVA
Author(s): Ramanuj Kumar | Ashok Kumar Sahoo | K.Satyanarayana | G. Venkateswara Rao
Volume: 4
Issue: 3
Year: 2013
Author(s): Ramanuj Kumar | Ashok Kumar Sahoo | K.Satyanarayana | G. Venkateswara Rao
Volume: 4
Issue: 3
Year: 2013
Inventory model with different demand rate and different holding cost
Author(s): R.P. Tripathi
Volume: 4
Issue: 3
Year: 2013
Author(s): R.P. Tripathi
Volume: 4
Issue: 3
Year: 2013
A fuzzy simulated evolution algorithm for integrated manufacturing system design
Author(s): Michael Mutingi
Volume: 4
Issue: 2
Year: 2013
Author(s): Michael Mutingi
Volume: 4
Issue: 2
Year: 2013
An imperialist competitive algorithm for a bi-objective parallel machine scheduling problem with load balancing consideration
Author(s): Mansooreh Madani-Isfahani | Ehsan Ghobadian | Hassan Irani Tekmehdash | Reza Tavakkoli-Moghaddam | Mahdi Naderi-Beni
Volume: 4
Issue: 2
Year: 2013
Author(s): Mansooreh Madani-Isfahani | Ehsan Ghobadian | Hassan Irani Tekmehdash | Reza Tavakkoli-Moghaddam | Mahdi Naderi-Beni
Volume: 4
Issue: 2
Year: 2013
A novel approach for solving a capacitated location allocation problem
Author(s): Masoud Rabbani | Helia Yousefnejad
Volume: 4
Issue: 2
Year: 2013
Author(s): Masoud Rabbani | Helia Yousefnejad
Volume: 4
Issue: 2
Year: 2013
Designing robust layout in cellular manufacturing systems with uncertain demands
Author(s): Kamran Forghani | Mohammad Mohammadi | Vahidreza Ghezavati
Volume: 4
Issue: 2
Year: 2013
Author(s): Kamran Forghani | Mohammad Mohammadi | Vahidreza Ghezavati
Volume: 4
Issue: 2
Year: 2013
A novel framework in complex network analysis: Considering both structure of relations and individual characteristics in closeness centrality computation
Author(s): F. Barzinpour | B. H. Ali Ahmadi
Volume: 4
Issue: 2
Year: 2013
Author(s): F. Barzinpour | B. H. Ali Ahmadi
Volume: 4
Issue: 2
Year: 2013
A two warehouse deterministic inventory model for deteriorating items with a linear trend in time dependent demand over finite time horizon by Elitist Real-Coded Genetic Algorithm
Author(s): A.K. Bhunia | Ali Akbar Shaikh | A.K. Maiti | M.Maiti
Volume: 4
Issue: 2
Year: 2013
Author(s): A.K. Bhunia | Ali Akbar Shaikh | A.K. Maiti | M.Maiti
Volume: 4
Issue: 2
Year: 2013
Using MACBETH method for supplier selection in manufacturing environment
Author(s): Prasad Karande | Shankar Chakraborty
Volume: 4
Issue: 2
Year: 2013
Author(s): Prasad Karande | Shankar Chakraborty
Volume: 4
Issue: 2
Year: 2013
Considering supply risk for supplier selection using an integrated framework of data envelopment analysis and neural networks
Author(s): Vahid Nourbakhsh | Abbas Ahmadi | Masoud Mahootchi
Volume: 4
Issue: 2
Year: 2013
Author(s): Vahid Nourbakhsh | Abbas Ahmadi | Masoud Mahootchi
Volume: 4
Issue: 2
Year: 2013
Optimization of Multiple Responses of Ultrasonic Machining (USM) Process: A Comparative Study
Author(s): Rina Chakravorty | Susanta Kumar Gauri | Shankar Chakraborty
Volume: 4
Issue: 2
Year: 2013
Author(s): Rina Chakravorty | Susanta Kumar Gauri | Shankar Chakraborty
Volume: 4
Issue: 2
Year: 2013
Computer aided FEA simulation of EN45A parabolic leaf spring
Author(s): Krishan Kumar | M. L. Aggarwal
Volume: 4
Issue: 2
Year: 2013
Author(s): Krishan Kumar | M. L. Aggarwal
Volume: 4
Issue: 2
Year: 2013
Framework for benchmarking online retailing performance using fuzzy AHP and TOPSIS method
Author(s): Golam Kabir | M. Ahsan Akhtar Hasin
Volume: 3
Issue: 4
Year: 2012
Author(s): Golam Kabir | M. Ahsan Akhtar Hasin
Volume: 3
Issue: 4
Year: 2012
Parametric optimization during machining of AISI 304 Austenitic Stainless Steel using CVD coated DURATOMIC cutting insert
Author(s): M. Kaladhar | K. Venkata Subbaiah | Ch. Srinivasa Rao
Volume: 3
Issue: 4
Year: 2012
Author(s): M. Kaladhar | K. Venkata Subbaiah | Ch. Srinivasa Rao
Volume: 3
Issue: 4
Year: 2012
A comprehensive bibliography on effectiveness measurement of manufacturing systems
Author(s): Sanjeev Goyal | Sandeep Grover
Volume: 3
Issue: 4
Year: 2012
Author(s): Sanjeev Goyal | Sandeep Grover
Volume: 3
Issue: 4
Year: 2012
A disruption production model with exponential demand
Author(s): U. K. Khedlekar
Volume: 3
Issue: 4
Year: 2012
Author(s): U. K. Khedlekar
Volume: 3
Issue: 4
Year: 2012
A two-phase fuzzy programming model for a complex bi-objective no-wait flow shop scheduling
Author(s): Mahdi Naderi-Beni | Reza Tavakkoli-Moghaddam | Bahman Naderi | Ehsan Ghobadian | Alireza Pourrousta
Volume: 3
Issue: 4
Year: 2012
Author(s): Mahdi Naderi-Beni | Reza Tavakkoli-Moghaddam | Bahman Naderi | Ehsan Ghobadian | Alireza Pourrousta
Volume: 3
Issue: 4
Year: 2012
Evolutionary approaches for scheduling a flexible manufacturing system with automated guided vehicles and robots
Author(s): Chandramouli Anandaraman | ArunVikram Madurai Sankar | Ramaraj Natarajan
Volume: 3
Issue: 4
Year: 2012
Author(s): Chandramouli Anandaraman | ArunVikram Madurai Sankar | Ramaraj Natarajan
Volume: 3
Issue: 4
Year: 2012
A MOORA based fuzzy multi-criteria decision making approach for supply chain strategy selection
Author(s): Balaram Dey | Bipradas Bairagi | Bijan Sarkar | Subir Sanyal
Volume: 3
Issue: 4
Year: 2012
Author(s): Balaram Dey | Bipradas Bairagi | Bijan Sarkar | Subir Sanyal
Volume: 3
Issue: 4
Year: 2012
An economic lot and delivery scheduling problem with the fuzzy shelf life in a flexible job shop with unrelated parallel machines
Author(s): S. Dousthaghi | R. Tavakkoli-Moghaddam
Volume: 3
Issue: 4
Year: 2012
Author(s): S. Dousthaghi | R. Tavakkoli-Moghaddam
Volume: 3
Issue: 4
Year: 2012
Bi-objective supply chain problem using MOPSO and NSGA-II
Author(s): Hassan Javanshir | Sadoullah Ebrahimnejad | Samaneh Nouri
Volume: 3
Issue: 4
Year: 2012
Author(s): Hassan Javanshir | Sadoullah Ebrahimnejad | Samaneh Nouri
Volume: 3
Issue: 4
Year: 2012
A note on "An economic order quantity (EOQ) for items with imperfect quality and inspection errors"
Author(s): Lie-Fern Hsu
Volume: 3
Issue: 4
Year: 2012
Author(s): Lie-Fern Hsu
Volume: 3
Issue: 4
Year: 2012
A parallel machine extension to aversion dynamics scheduling
Author(s): Gary W. Black | Kenneth N. McKay
Volume: 3
Issue: 4
Year: 2012
Author(s): Gary W. Black | Kenneth N. McKay
Volume: 3
Issue: 4
Year: 2012
An elitist teaching-learning-based optimization algorithm for solving complex constrained optimization problems
Author(s): R. Venkata Rao | Vivek Patel
Volume: 3
Issue: 4
Year: 2012
Author(s): R. Venkata Rao | Vivek Patel
Volume: 3
Issue: 4
Year: 2012
Optimal pricing and inventory policies for non-instantaneous deteriorating items with permissible delay in payment: Fuzzy expected value model
Author(s): Hardik N Soni | Kamlesh A Patel
Volume: 3
Issue: 3
Year: 2012
Author(s): Hardik N Soni | Kamlesh A Patel
Volume: 3
Issue: 3
Year: 2012
Permutation based decision making under fuzzy environment using Tabu search
Author(s): Mahdi Bashiri | Mehdi Koosha | Hossein Karimi
Volume: 3
Issue: 3
Year: 2012
Author(s): Mahdi Bashiri | Mehdi Koosha | Hossein Karimi
Volume: 3
Issue: 3
Year: 2012
Planning Annuaulised hours when spike in demand exists
Author(s): MR Sureshkumar | V Madhusudanan Pillai
Volume: 3
Issue: 3
Year: 2012
Author(s): MR Sureshkumar | V Madhusudanan Pillai
Volume: 3
Issue: 3
Year: 2012
Just-in-time preemptive single machine problem with costs of earliness/tardiness, interruption and work-in-process
Author(s): Mohammad Kazemi | Elnaz Nikoofarid | Amin Aalaei | Reza Kia
Volume: 3
Issue: 3
Year: 2012
Author(s): Mohammad Kazemi | Elnaz Nikoofarid | Amin Aalaei | Reza Kia
Volume: 3
Issue: 3
Year: 2012
Performance analysis of supply chains under customer demand information sharing using role play game
Author(s): T. Chinna Pamulety | V. Madhusudanan Pillai
Volume: 3
Issue: 3
Year: 2012
Author(s): T. Chinna Pamulety | V. Madhusudanan Pillai
Volume: 3
Issue: 3
Year: 2012
Single-machine batch scheduling minimizing weighted flow times and delivery costs with job release times
Author(s): Mohammad Mahdavi Mazdeh | Ali Naji Esfahani | Seyyed Ershad Sakkaki | Amir Ebrahimzadeh Pilerood
Volume: 3
Issue: 3
Year: 2012
Author(s): Mohammad Mahdavi Mazdeh | Ali Naji Esfahani | Seyyed Ershad Sakkaki | Amir Ebrahimzadeh Pilerood
Volume: 3
Issue: 3
Year: 2012
Weighted Euclidean distance based approach as a multiple attribute decision making method for plant or facility layout design selection
Author(s): R. Venkata Rao | Dinesh Singh
Volume: 3
Issue: 3
Year: 2012
Author(s): R. Venkata Rao | Dinesh Singh
Volume: 3
Issue: 3
Year: 2012
Supply chain coordination under retail competition and advertising dependent demand
Author(s): Mehdi Mirzaee | Ahmad Makui | Ebrahim Manzari Tavakoli
Volume: 3
Issue: 3
Year: 2012
Author(s): Mehdi Mirzaee | Ahmad Makui | Ebrahim Manzari Tavakoli
Volume: 3
Issue: 3
Year: 2012
Supplier evaluation in manufacturing environment using compromise ranking method with grey interval numbers
Author(s): Prasenjit Chatterjee | Rupsa Chatterjee
Volume: 3
Issue: 3
Year: 2012
Author(s): Prasenjit Chatterjee | Rupsa Chatterjee
Volume: 3
Issue: 3
Year: 2012
A fuzzy mixed integer linear programming model for integrating procurement-production-distribution planning in supply chain
Author(s): Alireza Pourrousta | Saleh Dehbari | Reza Tavakkoli-Moghaddam | Amir Imenpour | Mahdi Naderi-Beni
Volume: 3
Issue: 3
Year: 2012
Author(s): Alireza Pourrousta | Saleh Dehbari | Reza Tavakkoli-Moghaddam | Amir Imenpour | Mahdi Naderi-Beni
Volume: 3
Issue: 3
Year: 2012
Make or buy strategy decision making in supply quality chain
Author(s): Seyed Mohammad Seyedhosseini | Faezeh Mohammadipour | Milad Gorji Ashtiani
Volume: 3
Issue: 3
Year: 2012
Author(s): Seyed Mohammad Seyedhosseini | Faezeh Mohammadipour | Milad Gorji Ashtiani
Volume: 3
Issue: 3
Year: 2012
RAM investigation of coal-fired thermal power plants: A case study
Author(s): D. D. Adhikary | G. K. Bose | S Chattopadhyay | D. Bose | S. Mitra
Volume: 3
Issue: 3
Year: 2012
Author(s): D. D. Adhikary | G. K. Bose | S Chattopadhyay | D. Bose | S. Mitra
Volume: 3
Issue: 3
Year: 2012
Rapid Ant based clustering-genetic algorithm (RAC-GA) with local search for clustering problem
Author(s): Yaghub pirzadeh | Jamal shahrabi | Mohamad taghi taghavifard
Volume: 3
Issue: 3
Year: 2012
Author(s): Yaghub pirzadeh | Jamal shahrabi | Mohamad taghi taghavifard
Volume: 3
Issue: 3
Year: 2012
An EPQ model under two levels of trade credit and limited storage space
Author(s): Alok kumar | K K Kaanodiya | R R Pachauri
Volume: 3
Issue: 3
Year: 2012
Author(s): Alok kumar | K K Kaanodiya | R R Pachauri
Volume: 3
Issue: 3
Year: 2012
Evaluating high risks in large-scale projects using an extended VIKOR method under a fuzzy environment
Author(s): S. Ebrahimnejad | S. M. Mousavi | R Tavakkoli-Moghaddam | M Heydar
Volume: 3
Issue: 3
Year: 2012
Author(s): S. Ebrahimnejad | S. M. Mousavi | R Tavakkoli-Moghaddam | M Heydar
Volume: 3
Issue: 3
Year: 2012
A fuzzy neural network to estimate at completion costs of construction projects
Author(s): Mohammad Reza Feylizadeh | Ayad Hendalianpour | Morteza Bagherpour
Volume: 3
Issue: 3
Year: 2012
Author(s): Mohammad Reza Feylizadeh | Ayad Hendalianpour | Morteza Bagherpour
Volume: 3
Issue: 3
Year: 2012
Risk mitigation in the implementation of AMTs: A guiding framework for future
Author(s): Bhaskar Nagar | Tilak Raj
Volume: 3
Issue: 3
Year: 2012
Author(s): Bhaskar Nagar | Tilak Raj
Volume: 3
Issue: 3
Year: 2012
A branch and bound for single machine stochastic scheduling to minimize the maximum lateness ,
Author(s): Hamidreza Haddad | Mohammad Ebrahim Arbabian | Keyvan Kamandani Pour
Volume: 3
Issue: 3
Year: 2012
Author(s): Hamidreza Haddad | Mohammad Ebrahim Arbabian | Keyvan Kamandani Pour
Volume: 3
Issue: 3
Year: 2012
Tool flank wear model and parametric optimization in end milling of metal matrix composite using carbide tool: Response surface methodology approach
Author(s): R. Arokiadass | K. Palaniradja | N.Alagumoorthi
Volume: 3
Issue: 3
Year: 2012
Author(s): R. Arokiadass | K. Palaniradja | N.Alagumoorthi
Volume: 3
Issue: 3
Year: 2012
A note on “An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems”
Author(s): R. Venkata Rao
Volume: 3
Issue: 3
Year: 2012
Author(s): R. Venkata Rao
Volume: 3
Issue: 3
Year: 2012
Multi products single machine EPQ model with immediate rework process
Author(s): Ata Allah Taleizadeh | Leopoldo Eduardo Cárdenas-Barrón | Jahangir Biabani | Ramin Nikousokhan
Volume: 3
Issue: 2
Year: 2012
Author(s): Ata Allah Taleizadeh | Leopoldo Eduardo Cárdenas-Barrón | Jahangir Biabani | Ramin Nikousokhan
Volume: 3
Issue: 2
Year: 2012
Genetic algorithm to optimize two-echelon inventory control system for perishable goods in terms of active packaging
Author(s): Narges Khanlarzade | Babak Yousefi Yegane | Isa Nakhai
Volume: 3
Issue: 2
Year: 2012
Author(s): Narges Khanlarzade | Babak Yousefi Yegane | Isa Nakhai
Volume: 3
Issue: 2
Year: 2012
An EOQ model for three parameter Weibull deterioration with permissible delay in payments and associated salvage value
Author(s): C.K. Tripathy | L. M. Pradhan
Volume: 3
Issue: 2
Year: 2012
Author(s): C.K. Tripathy | L. M. Pradhan
Volume: 3
Issue: 2
Year: 2012
Multiple criteria inventory classification using fuzzy analytic hierarchy process
Author(s): Golam Kabir | M. Ahsan Akhtar Hasin
Volume: 3
Issue: 2
Year: 2012
Author(s): Golam Kabir | M. Ahsan Akhtar Hasin
Volume: 3
Issue: 2
Year: 2012
EOQ in fuzzy environment and trade credit
Author(s): Nita H Shaha | Sarla Pareek | Isha Sangal
Volume: 3
Issue: 2
Year: 2012
Author(s): Nita H Shaha | Sarla Pareek | Isha Sangal
Volume: 3
Issue: 2
Year: 2012
Part grouping and tool loading in versatile multi-tool machining centers
Author(s): D. Ganeshwar Rao | C. Patvardhan | Ranjit Singh
Volume: 3
Issue: 2
Year: 2012
Author(s): D. Ganeshwar Rao | C. Patvardhan | Ranjit Singh
Volume: 3
Issue: 2
Year: 2012
Competition of two supply chains with different risk structures: applying market research option
Author(s): A. Hafezolkotob | A Makui
Volume: 3
Issue: 2
Year: 2012
Author(s): A. Hafezolkotob | A Makui
Volume: 3
Issue: 2
Year: 2012
Heuristics for production scheduling problem with machining and assembly operations
Author(s): A Bhongade | P.M. Khodke
Volume: 3
Issue: 2
Year: 2012
Author(s): A Bhongade | P.M. Khodke
Volume: 3
Issue: 2
Year: 2012
Feature-based decision rules for control charts pattern recognition: A comparison between CART and QUEST algorithm
Author(s): Monark Bag | Susanta Kumar Gauri | Shankar Chakraborty
Volume: 3
Issue: 2
Year: 2012
Author(s): Monark Bag | Susanta Kumar Gauri | Shankar Chakraborty
Volume: 3
Issue: 2
Year: 2012
An order acceptance using FAHP and TOPSIS methods: A case study of Iranian vehicle belt production industry
Author(s): Saeid Parsaei | Mohammad Ali Keramati | Farbod Zorriassatine | Mohammad Reza Feylizadeh
Volume: 3
Issue: 2
Year: 2012
Author(s): Saeid Parsaei | Mohammad Ali Keramati | Farbod Zorriassatine | Mohammad Reza Feylizadeh
Volume: 3
Issue: 2
Year: 2012
A multi-item inventory system with expected shortage level-dependent backorder rate with working capital and space restrictions
Author(s): A. Gholami-Qadikolaei | A. Mirzazadeh | M. Kajizad
Volume: 3
Issue: 2
Year: 2012
Author(s): A. Gholami-Qadikolaei | A. Mirzazadeh | M. Kajizad
Volume: 3
Issue: 2
Year: 2012
A new supply chain management method with one-way time window: A hybrid PSO-SA approach
Author(s): Saleh Dehbari | Alireza Pour Rosta | Saadollah Ebrahim Nezhad | Reza Tavakkoli-Moghaddam | Hassan Javanshir
Volume: 3
Issue: 2
Year: 2012
Author(s): Saleh Dehbari | Alireza Pour Rosta | Saadollah Ebrahim Nezhad | Reza Tavakkoli-Moghaddam | Hassan Javanshir
Volume: 3
Issue: 2
Year: 2012
A new mathematical model for single machine batch scheduling problem for minimizing maximum lateness with deteriorating jobs
Author(s): Hamidreza Haddad | Payam Ghanbari | Ahmad Zeraatkar Moghaddam
Volume: 3
Issue: 2
Year: 2012
Author(s): Hamidreza Haddad | Payam Ghanbari | Ahmad Zeraatkar Moghaddam
Volume: 3
Issue: 2
Year: 2012
Virtual cellular manufacturing system based on resource element approach and analyzing its performance over different basic layouts
Author(s): M. Hamedi | N. Ismail | G. R. Esmaeilian | M. K. A. Ariffin
Volume: 3
Issue: 2
Year: 2012
Author(s): M. Hamedi | N. Ismail | G. R. Esmaeilian | M. K. A. Ariffin
Volume: 3
Issue: 2
Year: 2012
A note on models for a family of products with shelf life, and production and shortage costs in emerging markets (Short Communication)
Author(s): Leopoldo Eduardo Cárdenas-Barrón
Volume: 3
Issue: 2
Year: 2012
Author(s): Leopoldo Eduardo Cárdenas-Barrón
Volume: 3
Issue: 2
Year: 2012
Scheduling trucks in cross docking systems with temporary storage and dock repeat truck holding pattern using GRASP method
Author(s): Ehsan Ghobadian | Reza Tavakkoli-Moghaddam | Hassan Javanshir | Mahdi Naderi-Beni
Volume: 3
Issue: 11
Year: 2012
Author(s): Ehsan Ghobadian | Reza Tavakkoli-Moghaddam | Hassan Javanshir | Mahdi Naderi-Beni
Volume: 3
Issue: 11
Year: 2012
Integrated quadratic assignment and continuous facility layout problem
Author(s): Kamran Forghani | Alireza Arshadi khamseh | Mohammad Mohammadi
Volume: 3
Issue: 11
Year: 2012
Author(s): Kamran Forghani | Alireza Arshadi khamseh | Mohammad Mohammadi
Volume: 3
Issue: 11
Year: 2012
High dimensional real parameter optimization with teaching learning based optimization
Author(s): Suresh Chandra Satapathy | Anima Naik | K Parvathi
Volume: 3
Issue: 11
Year: 2012
Author(s): Suresh Chandra Satapathy | Anima Naik | K Parvathi
Volume: 3
Issue: 11
Year: 2012
A new approach for product cost estimation using data envelopment analysis
Author(s): Fantahun M. Defersha | Adil Salam | Nadia Bhuiyan
Volume: 3
Issue: 11
Year: 2012
Author(s): Fantahun M. Defersha | Adil Salam | Nadia Bhuiyan
Volume: 3
Issue: 11
Year: 2012
Developing a univariate approach to phase-I monitoring of fuzzy quality profiles
Author(s): Kazem Noghondarian | Shahram Ghobadi
Volume: 3
Issue: 11
Year: 2012
Author(s): Kazem Noghondarian | Shahram Ghobadi
Volume: 3
Issue: 11
Year: 2012
Introducing mass balancing theorem for network flow maximization
Author(s): Ziauddin Ursani
Volume: 3
Issue: 11
Year: 2012
Author(s): Ziauddin Ursani
Volume: 3
Issue: 11
Year: 2012
Multi-objective portfolio optimization of mutual funds under downside risk measure using fuzzy theory
Author(s): A. Alimi | M. Zandieh | M. Amiri
Volume: 3
Issue: 11
Year: 2012
Author(s): A. Alimi | M. Zandieh | M. Amiri
Volume: 3
Issue: 11
Year: 2012
Fuzzy system dynamics and optimization with application to manpower systems
Author(s): M. Mutingi | C. Mbohwa
Volume: 3
Issue: 11
Year: 2012
Author(s): M. Mutingi | C. Mbohwa
Volume: 3
Issue: 11
Year: 2012
Study of unmachined area in intricate machining after rough cut in WEDM
Author(s): Kamal Jangra
Volume: 3
Issue: 11
Year: 2012
Author(s): Kamal Jangra
Volume: 3
Issue: 11
Year: 2012
Emergency response network design for hazardous materials transportation with uncertain demand
Author(s): Elnaz Rezaei | Ehsan Ahmad Makui | Kamran Shahanaghi
Volume: 3
Issue: 11
Year: 2012
Author(s): Elnaz Rezaei | Ehsan Ahmad Makui | Kamran Shahanaghi
Volume: 3
Issue: 11
Year: 2012
Handling equipment Selection in open pit mines by using an integrated model based on group decision making
Author(s): Abdolreza Yazdani-Chamzini | Siamak Haji Yakhchali
Volume: 3
Issue: 11
Year: 2012
Author(s): Abdolreza Yazdani-Chamzini | Siamak Haji Yakhchali
Volume: 3
Issue: 11
Year: 2012
Effect of machining conditions on MRR and surface roughness during CNC Turning of different Materials Using TiN Coated Cutting Tools – A Taguchi approach
Author(s): H. K. Dave | L. S. Patel | H. K. Raval
Volume: 3
Issue: 11
Year: 2012
Author(s): H. K. Dave | L. S. Patel | H. K. Raval
Volume: 3
Issue: 11
Year: 2012
Towards a synergy between project and supply chain management
Author(s): Sanjay Sharma
Volume: 3
Issue: 11
Year: 2012
Author(s): Sanjay Sharma
Volume: 3
Issue: 11
Year: 2012
An integrated single-vendor single-buyer production-inventory model for items with imperfect quality and inspection errors
Author(s): J.T. Hsu | L.F. Hsu
Volume: 3
Issue: 11
Year: 2012
Author(s): J.T. Hsu | L.F. Hsu
Volume: 3
Issue: 11
Year: 2012
Vendor-buyer ordering policy when demand is trapezoidal
Author(s): Nita H. Shah | Digeshkumar B. Shah
Volume: 3
Issue: 11
Year: 2012
Author(s): Nita H. Shah | Digeshkumar B. Shah
Volume: 3
Issue: 11
Year: 2012
Reliability prediction for the vehicles equipped with advanced driver assistance systems (ADAS) and passive safety systems (PSS)
Author(s): Khashayar Hojjati-Emami | Balbir S. Dhillon | Kouroush Jenab
Volume: 3
Issue: 11
Year: 2012
Author(s): Khashayar Hojjati-Emami | Balbir S. Dhillon | Kouroush Jenab
Volume: 3
Issue: 11
Year: 2012
Markov approach to evaluate the availability simulation model for power generation system in a thermal power plant ,
Author(s): Ravinder Kumar | Avdhesh Kr. Sharma | P.C Tewari
Volume: 3
Issue: 11
Year: 2012
Author(s): Ravinder Kumar | Avdhesh Kr. Sharma | P.C Tewari
Volume: 3
Issue: 11
Year: 2012
Two parameter-tuned metaheuristic algorithms for the multi-level lot sizing and scheduling problem
Author(s): M. Babaei | M. Mohammadi | S.M.T. Fatemi Ghomi | M. A. Sobhanallahi
Volume: 3
Issue: 11
Year: 2012
Author(s): M. Babaei | M. Mohammadi | S.M.T. Fatemi Ghomi | M. A. Sobhanallahi
Volume: 3
Issue: 11
Year: 2012
A novel heuristic method to solve the capacitated arc routing problem
Author(s): Alireza Eydi | Leila Javazi
Volume: 3
Issue: 11
Year: 2012
Author(s): Alireza Eydi | Leila Javazi
Volume: 3
Issue: 11
Year: 2012
Utilizing simulation to evaluate production line performance under varying demand conditions
Author(s): Thomas McDonald | Eileen Van Aken | Kimberly Elli
Volume: 3
Issue: 1
Year: 2012
Author(s): Thomas McDonald | Eileen Van Aken | Kimberly Elli
Volume: 3
Issue: 1
Year: 2012
A survivability model for ejection of green compacts in powder metallurgy technology
Author(s): Payman Ahi | Kouroush Jenab | Ahmad Ghasempoor
Volume: 3
Issue: 1
Year: 2012
Author(s): Payman Ahi | Kouroush Jenab | Ahmad Ghasempoor
Volume: 3
Issue: 1
Year: 2012
Energy market and reserve market modeling in simultaneous and serial implementation methods with the aim of reducing electricity costs
Author(s): Ramin Ghoraba | Mohammad Taghi Ameli
Volume: 3
Issue: 1
Year: 2012
Author(s): Ramin Ghoraba | Mohammad Taghi Ameli
Volume: 3
Issue: 1
Year: 2012
Route activity tracking and management using available technology
Author(s): Sam Yousef Khoury
Volume: 3
Issue: 1
Year: 2012
Author(s): Sam Yousef Khoury
Volume: 3
Issue: 1
Year: 2012
Modeling a four-layer location-routing problem
Author(s): Mohsen Hamidi | Kambiz Farahmand | Seyed Reza Sajjadi
Volume: 3
Issue: 1
Year: 2012
Author(s): Mohsen Hamidi | Kambiz Farahmand | Seyed Reza Sajjadi
Volume: 3
Issue: 1
Year: 2012
Sufficient conditions for a flexible manufacturing system to be deadlocked
Author(s): Paul E. Deering
Volume: 3
Issue: 1
Year: 2012
Author(s): Paul E. Deering
Volume: 3
Issue: 1
Year: 2012
CFD heat transfer simulation of the human upper respiratory tract for oronasal breathing condition
Author(s): Kambiz Farahmand | Raghavan Srinivasan | Mohsen Hamidi
Volume: 3
Issue: 1
Year: 2012
Author(s): Kambiz Farahmand | Raghavan Srinivasan | Mohsen Hamidi
Volume: 3
Issue: 1
Year: 2012
Transmission network expansion planning based on hybridization model of neural networks and harmony search algorithm
Author(s): Mohammad Taghi Ameli | Mojtaba Shivaie | Saeid Moslehpour
Volume: 3
Issue: 1
Year: 2012
Author(s): Mohammad Taghi Ameli | Mojtaba Shivaie | Saeid Moslehpour
Volume: 3
Issue: 1
Year: 2012
A scheme for functional tolerancing: A product family in 3D CAD system
Author(s): Haoyu Wang | Ravindra Thamma
Volume: 3
Issue: 1
Year: 2012
Author(s): Haoyu Wang | Ravindra Thamma
Volume: 3
Issue: 1
Year: 2012
A fast-response production-inventory model for deteriorating seasonal products with learning in set-ups
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 4
Year: 2011
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 4
Year: 2011
A new improved genetic algorithm approach and a competitive heuristic method for large-scale multiple resource-constrained project-scheduling problems
Author(s): Mostafa Khanzadi | Rambod Soufipour | Mohammad Rostami
Volume: 2
Issue: 4
Year: 2011
Author(s): Mostafa Khanzadi | Rambod Soufipour | Mohammad Rostami
Volume: 2
Issue: 4
Year: 2011
An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems
Author(s): Chandramouli Anandaraman
Volume: 2
Issue: 4
Year: 2011
Author(s): Chandramouli Anandaraman
Volume: 2
Issue: 4
Year: 2011
The Karush–Kuhn–Tucker optimality conditions in minimum weight design of elastic rotating disks with variable thickness and density
Author(s): Sanaz Jafari
Volume: 2
Issue: 4
Year: 2011
Author(s): Sanaz Jafari
Volume: 2
Issue: 4
Year: 2011
An integrated TSP-GA with EOL cost model for selecting the best EOL option
Author(s): Zakri Ghazalli | Atsuo Murata
Volume: 2
Issue: 4
Year: 2011
Author(s): Zakri Ghazalli | Atsuo Murata
Volume: 2
Issue: 4
Year: 2011
The center location problem with equal weights in the presence of a probabilistic line barrier
Author(s): M. Amiri-Aref | N. Javadian | R. Tavakkoli-Moghaddam | M.B. Aryanezhad
Volume: 2
Issue: 4
Year: 2011
Author(s): M. Amiri-Aref | N. Javadian | R. Tavakkoli-Moghaddam | M.B. Aryanezhad
Volume: 2
Issue: 4
Year: 2011
A review of multi-criteria decision making techniques for supplier evaluation and selection
Author(s): Prince Agarwal | Manjari Sahai | Vaibhav Mishra | Monark Bag | Vrijendra Singh
Volume: 2
Issue: 4
Year: 2011
Author(s): Prince Agarwal | Manjari Sahai | Vaibhav Mishra | Monark Bag | Vrijendra Singh
Volume: 2
Issue: 4
Year: 2011
Coordinating a two-echelon supply chain under inflation and time value of money
Author(s): B.C. Giri | S. Bardhan
Volume: 2
Issue: 4
Year: 2011
Author(s): B.C. Giri | S. Bardhan
Volume: 2
Issue: 4
Year: 2011
Surface roughness model and parametric optimization in finish turning using coated carbide insert: Response surface methodology and Taguchi approach
Author(s): Ashok kumar Sahoo | Bidyadhar Sahoo
Volume: 2
Issue: 4
Year: 2011
Author(s): Ashok kumar Sahoo | Bidyadhar Sahoo
Volume: 2
Issue: 4
Year: 2011
A comparative study on the ranking performance of some multi-criteria decision-making methods for industrial robot selection
Author(s): Vijay Manikrao Athawale | Shankar Chakraborty
Volume: 2
Issue: 4
Year: 2011
Author(s): Vijay Manikrao Athawale | Shankar Chakraborty
Volume: 2
Issue: 4
Year: 2011
A robust moving average iterative weighting method to analyze the effect of outliers on the response surface design
Author(s): Mehdi Bashiri | Amir Moslemi
Volume: 2
Issue: 4
Year: 2011
Author(s): Mehdi Bashiri | Amir Moslemi
Volume: 2
Issue: 4
Year: 2011
Multi-objective assembly line balancing using genetic algorithm
Author(s): Samad Ayazi | Abdol Naser Hajizadeh | Mostafa Emrani Nooshabadi | Hamid reza Jalaie | Yaghoob Mohammad moradi
Volume: 2
Issue: 4
Year: 2011
Author(s): Samad Ayazi | Abdol Naser Hajizadeh | Mostafa Emrani Nooshabadi | Hamid reza Jalaie | Yaghoob Mohammad moradi
Volume: 2
Issue: 4
Year: 2011
A proposition of a manufactronic network approach for intelligent and flexible manufacturing systems
Author(s): Fernando Almeida | Paulo Dias | Gil Gonçalves | Michael Peschl | Michael Hoffmeister
Volume: 2
Issue: 4
Year: 2011
Author(s): Fernando Almeida | Paulo Dias | Gil Gonçalves | Michael Peschl | Michael Hoffmeister
Volume: 2
Issue: 4
Year: 2011
Retailer’s optimal ordering policies with cash discount and progressive payment scheme derived algebraically
Author(s): Alok kumar | K K Kaanodiya | R R Pachauri
Volume: 2
Issue: 4
Year: 2011
Author(s): Alok kumar | K K Kaanodiya | R R Pachauri
Volume: 2
Issue: 4
Year: 2011
(Q, R) inventory model with service level constraint and variable lead time in fuzzy-stochastic environment
Author(s): Hardik Soni
Volume: 2
Issue: 4
Year: 2011
Author(s): Hardik Soni
Volume: 2
Issue: 4
Year: 2011
Integration of part selection, machine loading and machining optimisation decisions for balanced workload in flexible manufacturing system
Author(s): Mussa I. Mgwatu
Volume: 2
Issue: 4
Year: 2011
Author(s): Mussa I. Mgwatu
Volume: 2
Issue: 4
Year: 2011
Pricing for freight carriers in a competitive environment: A game theory approach
Author(s): Marzieh Mozafari | Behrooz Karimi
Volume: 2
Issue: 3
Year: 2011
Author(s): Marzieh Mozafari | Behrooz Karimi
Volume: 2
Issue: 3
Year: 2011
Optimal ordering and pricing policy for price sensitive stock–dependent demand under progressive payment scheme
Author(s): Nita H. Shah | Amisha R. Patel | Kuo-Ren Lou
Volume: 2
Issue: 3
Year: 2011
Author(s): Nita H. Shah | Amisha R. Patel | Kuo-Ren Lou
Volume: 2
Issue: 3
Year: 2011
Simple assembly line balancing problem under task deterioration
Author(s): M. Emrani Noushabadi | U. Bahalke | K. Dolatkhahi | S. Dolatkhahi | A. Makui
Volume: 2
Issue: 3
Year: 2011
Author(s): M. Emrani Noushabadi | U. Bahalke | K. Dolatkhahi | S. Dolatkhahi | A. Makui
Volume: 2
Issue: 3
Year: 2011
Optimal production strategy for deteriorating items with varying demand pattern under inflation
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 3
Year: 2011
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 3
Year: 2011
Simultaneous optimization of material removal rate and surface roughness for WEDM of WC-Co composite using grey relational analysis along with Taguchi method
Author(s): Kamal Jangra | Sandeep Grover | Aman Aggarwal
Volume: 2
Issue: 3
Year: 2011
Author(s): Kamal Jangra | Sandeep Grover | Aman Aggarwal
Volume: 2
Issue: 3
Year: 2011
A mathematical model for weighted tardy jobs scheduling problem with a batched delivery system
Author(s): Mohammad Mahdavi Mazdeh | Amir Hamidinia | Ayatollah Karamouzian
Volume: 2
Issue: 3
Year: 2011
Author(s): Mohammad Mahdavi Mazdeh | Amir Hamidinia | Ayatollah Karamouzian
Volume: 2
Issue: 3
Year: 2011
Anthropometric evaluations and assessment of school furniture design in Nigeria: A case study of secondary schools in rural area of Odeda, Nigeria
Author(s): Adekunle Ibrahim Musa
Volume: 2
Issue: 3
Year: 2011
Author(s): Adekunle Ibrahim Musa
Volume: 2
Issue: 3
Year: 2011
A hybrid model for multi-objective capacitated facility location network design problem
Author(s): Mohammad saeed JabalAmeli | Marzieh Mortezaei
Volume: 2
Issue: 3
Year: 2011
Author(s): Mohammad saeed JabalAmeli | Marzieh Mortezaei
Volume: 2
Issue: 3
Year: 2011
A new approach for cell formation and scheduling with assembly operations and product structure
Author(s): Mir Bahador Aryanezhad | Jamal Aliabadi | Reza Tavakkoli-Moghaddam
Volume: 2
Issue: 3
Year: 2011
Author(s): Mir Bahador Aryanezhad | Jamal Aliabadi | Reza Tavakkoli-Moghaddam
Volume: 2
Issue: 3
Year: 2011
A deterministic model for deteriorating items with displayed inventory level dependent demand rate incorporating marketing decisions with transportation cost
Author(s): A. K. Bhunia | Ali Akbar Shaikh
Volume: 2
Issue: 3
Year: 2011
Author(s): A. K. Bhunia | Ali Akbar Shaikh
Volume: 2
Issue: 3
Year: 2011
A new stochastic mixed integer programming to design integrated cellular manufacturing system: A supply chain framework
Author(s): Vahid Reza Ghezavati
Volume: 2
Issue: 3
Year: 2011
Author(s): Vahid Reza Ghezavati
Volume: 2
Issue: 3
Year: 2011
The impact of Weibull data and autocorrelation on the performance of the Shewhart and exponentially weighted moving average control charts
Author(s): Gary Black | James Smith | Sabrina Wells
Volume: 2
Issue: 3
Year: 2011
Author(s): Gary Black | James Smith | Sabrina Wells
Volume: 2
Issue: 3
Year: 2011
A measurement method of routing flexibility in manufacturing systems
Author(s): F. Zammori | M. Braglia | M. Frosolinia
Volume: 2
Issue: 3
Year: 2011
Author(s): F. Zammori | M. Braglia | M. Frosolinia
Volume: 2
Issue: 3
Year: 2011
Multi-objective group scheduling with learning effect in the cellular manufacturing system
Author(s): Mohammad Taghi Taghavi-fard | Hassan Javanshir | Mohammad Ali Roueintan | Ehsan Soleimany
Volume: 2
Issue: 3
Year: 2011
Author(s): Mohammad Taghi Taghavi-fard | Hassan Javanshir | Mohammad Ali Roueintan | Ehsan Soleimany
Volume: 2
Issue: 3
Year: 2011
A hybrid multiple attribute decision making method for solving problems of industrial environment
Author(s): Dinesh Singh | R. Venkata Rao
Volume: 2
Issue: 3
Year: 2011
Author(s): Dinesh Singh | R. Venkata Rao
Volume: 2
Issue: 3
Year: 2011
Hat and squeeze functions, a way for making precise algorithms
Author(s): Elham Shadkam | Abdollah Aghaiea
Volume: 2
Issue: 3
Year: 2011
Author(s): Elham Shadkam | Abdollah Aghaiea
Volume: 2
Issue: 3
Year: 2011
Integrated inventory models with two–level credit policy and a price negotiation scenario for price–sensitive Stock–dependent demand
Author(s): Nita H. Shah | Amisha R. Patel
Volume: 2
Issue: 3
Year: 2011
Author(s): Nita H. Shah | Amisha R. Patel
Volume: 2
Issue: 3
Year: 2011
A multi-objective imperialist competitive algorithm for a capacitated hub covering location problem
Author(s): M. Mohammadi | R. Tavakkoli-Moghaddam | H. Rostami
Volume: 2
Issue: 3
Year: 2011
Author(s): M. Mohammadi | R. Tavakkoli-Moghaddam | H. Rostami
Volume: 2
Issue: 3
Year: 2011
Mathematical modelling and performance optimization of CO2 cooling system of a fertilizer plant
Author(s): Sanjeev Kumar | P. C. Tewari
Volume: 2
Issue: 3
Year: 2011
Author(s): Sanjeev Kumar | P. C. Tewari
Volume: 2
Issue: 3
Year: 2011
Retailer’s inventory policy for deteriorating items under partial trade credit policy
Author(s): Alok Kumar | K. K. Kaanodiaya | R. R. Pachaur
Volume: 2
Issue: 3
Year: 2011
Author(s): Alok Kumar | K. K. Kaanodiaya | R. R. Pachaur
Volume: 2
Issue: 3
Year: 2011
A BSC-DEA approach to measure the relative efficiency of service industry: A case study of banking sector
Author(s): M. B. Aryanezhad | E. Najafi | S. Bakhshi Farkoosh
Volume: 2
Issue: 2
Year: 2011
Author(s): M. B. Aryanezhad | E. Najafi | S. Bakhshi Farkoosh
Volume: 2
Issue: 2
Year: 2011
An EOQ model with time dependent Weibull deterioration and ramp type demand ,
Author(s): Chaitanya Kumar Tripathy | Umakanta Mishra
Volume: 2
Issue: 2
Year: 2011
Author(s): Chaitanya Kumar Tripathy | Umakanta Mishra
Volume: 2
Issue: 2
Year: 2011
Adjusted permutation method for multiple attribute decision making with meta-heuristic solution approaches
Author(s): Hossein Karimi | Alireza Rezaeinia
Volume: 2
Issue: 2
Year: 2011
Author(s): Hossein Karimi | Alireza Rezaeinia
Volume: 2
Issue: 2
Year: 2011
Design and analysis of experiments in ANFIS modeling for stock price prediction
Author(s): Meysam Alizadeh | Mohsen Gharakhani | Elnaz Fotoohi | Roy Rada
Volume: 2
Issue: 2
Year: 2011
Author(s): Meysam Alizadeh | Mohsen Gharakhani | Elnaz Fotoohi | Roy Rada
Volume: 2
Issue: 2
Year: 2011
An artificial neural network model for optimization of finished goods inventory
Author(s): Sanjoy K. Paul | Abdullahil Azaeem
Volume: 2
Issue: 2
Year: 2011
Author(s): Sanjoy K. Paul | Abdullahil Azaeem
Volume: 2
Issue: 2
Year: 2011
Multi products single machine economic production quantity model with multiple batch size
Author(s): Ata Allah Taleizadeh | Gede Agus Widyadana | Hui Ming Wee | Jahangir Biabanid
Volume: 2
Issue: 2
Year: 2011
Author(s): Ata Allah Taleizadeh | Gede Agus Widyadana | Hui Ming Wee | Jahangir Biabanid
Volume: 2
Issue: 2
Year: 2011
A Portfolio Selection Using Fuzzy Analytic Hierarchy Process: A Case Study of Iranian pharmaceutical industry
Author(s): Solmaz Ghazanfar Ahari | Nader Ghaffari-Nasab | Ahmad Makui | Seyed Hassan Ghodshttp://www.doaj.org/restrictedypour
Volume: 2
Issue: 2
Year: 2011
Author(s): Solmaz Ghazanfar Ahari | Nader Ghaffari-Nasab | Ahmad Makui | Seyed Hassan Ghodshttp://www.doaj.org/restrictedypour
Volume: 2
Issue: 2
Year: 2011
Economic order quantity model for deteriorating items with imperfect quality and permissible delay on payment
Author(s): Chandra K. Jaggi | Satish K. Goel | Mandeep Mittal
Volume: 2
Issue: 2
Year: 2011
Author(s): Chandra K. Jaggi | Satish K. Goel | Mandeep Mittal
Volume: 2
Issue: 2
Year: 2011
A new IPSO-SA approach for cardinality constrained portfolio optimization
Author(s): Marzieh Mozafari | Sajedeh Tafazzoli | Fariborz Jolai
Volume: 2
Issue: 2
Year: 2011
Author(s): Marzieh Mozafari | Sajedeh Tafazzoli | Fariborz Jolai
Volume: 2
Issue: 2
Year: 2011
Supply chain coordination for a deteriorating product under stock-dependent consumption rate and unreliable production process
Author(s): B. C. Giri | A. Chakraborty
Volume: 2
Issue: 2
Year: 2011
Author(s): B. C. Giri | A. Chakraborty
Volume: 2
Issue: 2
Year: 2011
A comprehensive mathematical model for hybrid flexible flowshop lot streaming problem
Author(s): Fantahun M. Defersha
Volume: 2
Issue: 2
Year: 2011
Author(s): Fantahun M. Defersha
Volume: 2
Issue: 2
Year: 2011
A new mathematical model for the job shop scheduling problem with uncertain processing times
Author(s): M. A. Shafia | M. Pourseyed Aghaee | A. Jamili
Volume: 2
Issue: 2
Year: 2011
Author(s): M. A. Shafia | M. Pourseyed Aghaee | A. Jamili
Volume: 2
Issue: 2
Year: 2011
Supplier selection and order lot sizing using dynamic programming
Author(s): M. M. Moqri | M. Moshref Javadi | S. A. Yazdian
Volume: 2
Issue: 2
Year: 2011
Author(s): M. M. Moqri | M. Moshref Javadi | S. A. Yazdian
Volume: 2
Issue: 2
Year: 2011
Optimum assembly line balancing: A stochastic programming approach
Author(s): Dilip Roy | Debdip khan
Volume: 2
Issue: 2
Year: 2011
Author(s): Dilip Roy | Debdip khan
Volume: 2
Issue: 2
Year: 2011
Behavioral rules of bank’s point-of-sale for segments description and scoring prediction
Author(s): Mehdi Bizhani | Mohammad Jafar Tarokh
Volume: 2
Issue: 2
Year: 2011
Author(s): Mehdi Bizhani | Mohammad Jafar Tarokh
Volume: 2
Issue: 2
Year: 2011
An inventory model of two-warehouse system with variable demand dependent on instantaneous displayed stock and marketing decisions via hybrid RCGA
Author(s): A. K. Bhunia | P. Pal | S. Chattopadhyay | B. K. Medya
Volume: 2
Issue: 2
Year: 2011
Author(s): A. K. Bhunia | P. Pal | S. Chattopadhyay | B. K. Medya
Volume: 2
Issue: 2
Year: 2011
A single period inventory model for incorporating two-ordering opportunities under imprecise demand information
Author(s): G. C. Mahata
Volume: 2
Issue: 2
Year: 2011
Author(s): G. C. Mahata
Volume: 2
Issue: 2
Year: 2011
A joint lot-sizing and marketing model with reworks, scraps and imperfect products
Author(s): Mohsen Fathollah Bayati | Morteza Rasti Barzoki | Seyed Reza Hejazi
Volume: 2
Issue: 2
Year: 2011
Author(s): Mohsen Fathollah Bayati | Morteza Rasti Barzoki | Seyed Reza Hejazi
Volume: 2
Issue: 2
Year: 2011
A multilevel evolutionary algorithm for optimizing numerical functions
Author(s): Reza Akbari | Koorush Ziarati
Volume: 2
Issue: 2
Year: 2011
Author(s): Reza Akbari | Koorush Ziarati
Volume: 2
Issue: 2
Year: 2011
A Simulated Annealing method to solve a generalized maximal covering location problem
Author(s): M. Saeed Jabalameli | Behzad Bankian Tabrizi | Mohammad Moshref Javadi
Volume: 2
Issue: 2
Year: 2011
Author(s): M. Saeed Jabalameli | Behzad Bankian Tabrizi | Mohammad Moshref Javadi
Volume: 2
Issue: 2
Year: 2011
Artificial Bee colony for resource constrained project scheduling problem
Author(s): Reza Akbari | Vahid Zeighami | Koorush Ziarati
Volume: 2
Issue: 1
Year: 2011
Author(s): Reza Akbari | Vahid Zeighami | Koorush Ziarati
Volume: 2
Issue: 1
Year: 2011
A new effective heuristic method for the no-wait flowshop with sequence-dependent setup times problem
Author(s): Daniella Castro Araújoa | Marcelo Seido Nagano
Volume: 2
Issue: 1
Year: 2011
Author(s): Daniella Castro Araújoa | Marcelo Seido Nagano
Volume: 2
Issue: 1
Year: 2011
Box-Cox Test: the theoretical justification and US-China empirical study
Author(s): Tam Bang Vu
Volume: 2
Issue: 1
Year: 2011
Author(s): Tam Bang Vu
Volume: 2
Issue: 1
Year: 2011
CONWIP card setting in a flow-shop system with a batch production machine
Author(s): Marcello Braglia | Marco Frosolini | Roberto Gabbrielli | Francesco Zammori
Volume: 2
Issue: 1
Year: 2011
Author(s): Marcello Braglia | Marco Frosolini | Roberto Gabbrielli | Francesco Zammori
Volume: 2
Issue: 1
Year: 2011
Meta-heuristics in cellular manufacturing: A state-of-the-art review
Author(s): Tamal Ghosh | Sourav Sengupta | Manojit Chattopadhyay | Pranab K Dan
Volume: 2
Issue: 1
Year: 2011
Author(s): Tamal Ghosh | Sourav Sengupta | Manojit Chattopadhyay | Pranab K Dan
Volume: 2
Issue: 1
Year: 2011
A variable neighborhood descent based heuristic to solve the capacitated location-routing problem
Author(s): M. S. Jabal-Ameli | M. B. Aryanezhad | N. Ghaffari-Nasab
Volume: 2
Issue: 1
Year: 2011
Author(s): M. S. Jabal-Ameli | M. B. Aryanezhad | N. Ghaffari-Nasab
Volume: 2
Issue: 1
Year: 2011
Periodic and continuous inventory models in the presence of fuzzy costs
Author(s): Soheil Sadi-Nezhad | Shima Memar Nahavandi | Jamshid Nazemi
Volume: 2
Issue: 1
Year: 2011
Author(s): Soheil Sadi-Nezhad | Shima Memar Nahavandi | Jamshid Nazemi
Volume: 2
Issue: 1
Year: 2011
An integrated multi−period planning of the production and transportation of multiple petroleum products in a single pipeline system
Author(s): Alberto Herrán | Fantahun M. Defersha | Mingyuan Chen | Jesús M. de la Cruz
Volume: 2
Issue: 1
Year: 2011
Author(s): Alberto Herrán | Fantahun M. Defersha | Mingyuan Chen | Jesús M. de la Cruz
Volume: 2
Issue: 1
Year: 2011
An inventory model for deteriorating items with varying demand pattern and unknown time horizon
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 1
Year: 2011
Author(s): Ibraheem Abdul | Atsuo Murata
Volume: 2
Issue: 1
Year: 2011
Stochastic integrated vendor–buyer model with unstable lead time and setup cost
Author(s): Chandra K. Jaggi | Neetu Arneja
Volume: 2
Issue: 1
Year: 2011
Author(s): Chandra K. Jaggi | Neetu Arneja
Volume: 2
Issue: 1
Year: 2011
Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate
Author(s): K. A. Halim | B. C. Giri | K. S. Chaudhuri
Volume: 2
Issue: 1
Year: 2011
Author(s): K. A. Halim | B. C. Giri | K. S. Chaudhuri
Volume: 2
Issue: 1
Year: 2011
A multi-objective possibilistic programming approach for locating distribution centers and allocating customers demands in supply chains
Author(s): Seyed Ahmad Yazdian | Kamran Shahanaghi
Volume: 2
Issue: 1
Year: 2011
Author(s): Seyed Ahmad Yazdian | Kamran Shahanaghi
Volume: 2
Issue: 1
Year: 2011
Feedback optimal control of dynamic stochastic two-machine flowshop with a finite buffer
Author(s): Thang Diep | Jean-Pierre Kenné | Thien-My Dao
Volume: 1
Issue: 2
Year: 2010
Author(s): Thang Diep | Jean-Pierre Kenné | Thien-My Dao
Volume: 1
Issue: 2
Year: 2010
Economic lot scheduling problem with consideration of money time value
Author(s): Maryam Mokhlesian | Seyyed Mohammad Taghi Fatemi Ghomi | Fariborz Jolai
Volume: 1
Issue: 2
Year: 2010
Author(s): Maryam Mokhlesian | Seyyed Mohammad Taghi Fatemi Ghomi | Fariborz Jolai
Volume: 1
Issue: 2
Year: 2010
Integrated model for line balancing with workstation inventory management
Author(s): Dilip Roy | Debdip khan
Volume: 1
Issue: 2
Year: 2010
Author(s): Dilip Roy | Debdip khan
Volume: 1
Issue: 2
Year: 2010
A fuzzy modeling for single machine scheduling problem with deteriorating jobs
Author(s): Mohammad Mahavi Mazdeh | Farzad Zaerpour | Farzad Firouzi Jahantigh
Volume: 1
Issue: 2
Year: 2010
Author(s): Mohammad Mahavi Mazdeh | Farzad Zaerpour | Farzad Firouzi Jahantigh
Volume: 1
Issue: 2
Year: 2010
A particle swarm approach to solve environmental/economic dispatch problem
Author(s): Yee Ming Chen | Wen-Shiang Wang
Volume: 1
Issue: 2
Year: 2010
Author(s): Yee Ming Chen | Wen-Shiang Wang
Volume: 1
Issue: 2
Year: 2010
Fuzzy analytical hierarchy process using preference ratio: A case study for selecting management short course in a business school
Author(s): Mohammad Modarres | Soheil Sadi-Nezhad
Volume: 1
Issue: 2
Year: 2010
Author(s): Mohammad Modarres | Soheil Sadi-Nezhad
Volume: 1
Issue: 2
Year: 2010
The impact of the Weibull distribution on the performance of the single-factor ANOVA model
Author(s): Gray Black | Derek Ard | James Smith | Tim Schibik
Volume: 1
Issue: 2
Year: 2010
Author(s): Gray Black | Derek Ard | James Smith | Tim Schibik
Volume: 1
Issue: 2
Year: 2010
Providing hierarchical approach for measuring supply chain performance using AHP and DEMATEL methodologies
Author(s): Ali Najmi | Ahmad Makui
Volume: 1
Issue: 2
Year: 2010
Author(s): Ali Najmi | Ahmad Makui
Volume: 1
Issue: 2
Year: 2010
A discrete firefly meta-heuristic with local search for makespan minimization in permutation flow shop scheduling problems
Author(s): Mohammad Kazem Sayadi | Reza Ramezanian | Nader Ghaffari-Nasab
Volume: 1
Issue: 1
Year: 2010
Author(s): Mohammad Kazem Sayadi | Reza Ramezanian | Nader Ghaffari-Nasab
Volume: 1
Issue: 1
Year: 2010
An optimal lot sizing and pricing in two echelon supply chain
Author(s): Jafar Naeij | Hasan Shavandi
Volume: 1
Issue: 1
Year: 2010
Author(s): Jafar Naeij | Hasan Shavandi
Volume: 1
Issue: 1
Year: 2010
An inventory model with dependent returns and disposal cost
Author(s): Mohammad Ebrahim Nikoofal | Seyed Mohammad Moattar Husseini
Volume: 1
Issue: 1
Year: 2010
Author(s): Mohammad Ebrahim Nikoofal | Seyed Mohammad Moattar Husseini
Volume: 1
Issue: 1
Year: 2010
A particle swarm approach to solve vehicle routing problem with uncertain demand: A drug distribution case study
Author(s): Babak Farhang Moghadam
Volume: 1
Issue: 1
Year: 2010
Author(s): Babak Farhang Moghadam
Volume: 1
Issue: 1
Year: 2010
An empirical study of Iranian regional airports using robust data envelopment analysis
Author(s): Emad Roghanian | Amin Foroughi
Volume: 1
Issue: 1
Year: 2010
Author(s): Emad Roghanian | Amin Foroughi
Volume: 1
Issue: 1
Year: 2010
A robust multi-objective production planning
Author(s): Mohsen Gharakhani | Tahere Taghipour | Kambiz Jalali Farahani
Volume: 1
Issue: 1
Year: 2010
Author(s): Mohsen Gharakhani | Tahere Taghipour | Kambiz Jalali Farahani
Volume: 1
Issue: 1
Year: 2010
Optimal pricing and lot sizing vendor managed inventory
Author(s): Mohsen Ziaee | J. L. Bouquard
Volume: 1
Issue: 1
Year: 2010
Author(s): Mohsen Ziaee | J. L. Bouquard
Volume: 1
Issue: 1
Year: 2010
The challenges of knowledge management portals application and implementation:An Iranian organizations case study
Author(s): Payman Akhavan | Mohammad Saleh Adalati | Sara Sharifi-Yazdi | Reza Hosnavi
Volume: 1
Issue: 1
Year: 2010
Author(s): Payman Akhavan | Mohammad Saleh Adalati | Sara Sharifi-Yazdi | Reza Hosnavi
Volume: 1
Issue: 1
Year: 2010
Add to my list
My list