Academic Journals Database
Disseminating quality controlled scientific knowledge

Limit load solution for mismatched welded plate and pressure vessel with a surface crack

ADD TO MY LIST
 
Author(s): Argoub Emhamed | Sedmak Aleksandar | Sedmak Stojan | Adziev Gorgi

Journal: Theoretical and Applied Mechanics
ISSN 1450-5584

Volume: 32;
Issue: 2;
Start page: 97;
Date: 2005;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: limit load | overmatching | under matching | FEM-finite elements method | 3D | surface crack plate | pressure vessel | center cracked tensile specimen

ABSTRACT
Fracture behavior of a structure having a crack in the middle of a weld is influenced by the mechanical properties of the welded joint constituents (weld metal, base metal, heat-affected-zone) and their geometry. Therefore, defect assessment procedures have been developed in order to take into account all those affecting parameters. One of the key point for all those defect assessment procedures is to have limit load solutions of the mismatch structure. Such limit load solutions have been obtained by using 3D finite element solutions for different configurations such as plate with surface crack in tension or pressure vessel with axial external surface crack exposed to internal pressure, since those limit load have been obtained for non-hardening material exponent.
     40% off discount for PC Health Advisor